|
|||
DRUGS & SUPPLEMENTS
|
How long you have been taking the medicine? |
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration.
The formulas of the active ingredients are:
Ingredients | Molecular Formula | Molecular Weight | |
---|---|---|---|
Sodium Chloride USP Potassium Chloride USP | NaCl KCl | 58.44 74.55 | |
Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP | Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Y94-003-064 LD-185-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. EXP LOT Latex free, DEHP free, PVC free Recycle 7 0.075% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.45% Sodium Chloride Injection USP REF L6340 NDC 0264-7634-00 1000 mL EXCEL ® CONTAINER 10 mEq K+/liter Y94-003-097 LD-258-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.45 g Potassium Chloride USP 0.075 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 425 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 77 K+ 10 Cl– 87 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA Y94-003-065 LD-166-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. EXP LOT Latex free, DEHP free, PVC free Recycle 7 0.15% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.45% Sodium Chloride Injection USP REF L6350 NDC 0264-7635-00 DIN 01931547 1000 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-096 LD-265-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.45 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 445 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 77 K+ 20 Cl– 97 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Y94-003-066 LD-158-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. Latex free, DEHP free, PVC free Recycle 7 0.22% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.45% Sodium Chloride Injection USP REF L6360 NDC 0264-7636-00 1000 mL EXCEL® CONTAINER 30 mEq K+/liter Y94-003-099 LD-266-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.45 g Potassium Chloride USP 0.22 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 465 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 77 K+ 30 Cl– 107 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. Y94-003-067 LD-157-2 EXP LOT Latex-free, DEHP-free, PVC-free Recycle 7 0.30% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.45% Sodium Chloride Injection USP REF L6380 NDC 0264-7638-00 DIN 01931571 1000 mL EXCEL® CONTAINER 40 mEq K+/liter Y94-003-100 LD-274-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.45 g Potassium Chloride USP 0.3 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 490 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 77 K+ 40 Cl– 117 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. Y94-003-068 LD-156-2 EXP LOT Latex-free, DEHP-free, PVC-free Recycle 7 0.075% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6440 NDC 0264-7644-00 1000 mL EXCEL® CONTAINER 10 mEq K+/liter Y94-003-097 LD-258-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.075 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 340 mOsmol/liter Electrolytes (mEq/liter): Na+ 34 K+ 10 Cl– 44 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex-free, DEHP-free, PVC-free Recycle 7 0.15% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6450 NDC 0264-7645-00 DIN 01931598 1000 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-096 LD-265-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 360 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 34 K+ 20 Cl– 54 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Y94-003-070 LD-163-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. EXP LOT Latex free, DEHP free, PVC free Recycle 7 0.15% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6452 NDC 0264-7645-20 DIN 01931598 250 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-109 LD-267-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 360 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 34; K+ 20; Cl– 54 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex free, DEHP free, PVC free Recycle 7 0.22% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6460 NDC 0264-7646-00 1000 mL EXCEL ® CONTAINER 30 mEq K+/liter Y94-003-099 LD-266-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.22 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 380 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 34 K+ 30 Cl– 64 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex free, DEHP free, PVC free Recycle 7 0.30% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6480 NDC 0264-7648-00 1000 mL EXCEL ® CONTAINER 40 mEq K+/liter Y94-003-100 LD-274-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.3 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 400 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 34 K+ 40 Cl– 74 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex free, DEHP free, PVC free Recycle 7 0.15% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.9% Sodium Chloride Injection USP REF L6520 NDC 0264-7652-00 DIN 01931644 1000 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-096 LD-265-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.9 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 600 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 154 K+ 20 Cl– 174 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Y94-003-074 LD-155-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. EXP LOT Latex free, DEHP free, PVC free Recycle 7 0.15% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.33% Sodium Chloride Injection USP REF L6550 NDC 0264-7655-00 DIN 01931601 1000 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-096 LD-265-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.33 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 405 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 56 K+ 20 Cl– 76 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Rx only EXCEL is a registered trademark of B. Braun Medical Inc. B. Braun Medical Inc. Irvine, CA 92614-5895 USA 1-800-227-2862 www.bbraun.com Made in USA In Canada, distributed by: B. Braun Medical Inc. Scarborough, Ontario M1H 2W4 Y94-003-075 LD-159-2 Do not remove overwrap until ready for use. After removing the overwrap, check for minute leaks by squeezing container firmly. If leaks are found, discard solution as sterility may be impaired. EXP LOT Latex free, DEHP free, PVC free Recycle 7 0.15% Potassium Chloride in 10% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.20% Sodium Chloride Injection USP REF L6632 NDC 0264-7663-20 250 mL EXCEL ® CONTAINER 20 mEq K+/liter Y94-003-109 LD-267-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 10 g Sodium Chloride USP 0.2 g Potassium Chloride USP 0.15 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 615 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 34; K+ 20; Cl– 54 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex free, DEHP free, PVC free Recycle 7 0.30% Potassium Chloride in 5% Dextrose 2.5% and Sodium Chloride 0.11% in plastic container and 0.9% Sodium Chloride Injection USP REF L6820 NDC 0264-7682-00 1000 mL EXCEL® CONTAINER 40 mEq K+/liter Y94-003-100 LD-274-1 Each 100 mL contains: Hydrous Dextrose 2.5% and Sodium Chloride 0.11% in plastic container USP 5 g Sodium Chloride USP 0.9 g Potassium Chloride USP 0.3 g Water for Injection USP qs pH: 4.4 (3.5-6.5) Calc. Osmolarity: 640 mOsmol/liter, hypertonic Electrolytes (mEq/liter): Na+ 154 K+ 40 Cl– 194 Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For intravenous use only. Use only if solution is clear and container and seals are intact. WARNINGS: Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from freezing. See Package Insert. Latex-free, DEHP-free, PVC-free Recycle 7 advertisement
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container pharmaceutical active ingredients containing related brand and generic drugs:
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container available forms, composition, doses:
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container destination | category:
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container Anatomical Therapeutic Chemical codes:
Dextrose 2.5% and Sodium Chloride 0.11% in plastic container pharmaceutical companies:
advertisement
References
Frequently asked QuestionsCan i drive or operate heavy machine after consuming Dextrose 2.5% and Sodium Chloride 0.11% in plastic container?Depending on the reaction of the Dextrose 2.5% and Sodium Chloride 0.11% in plastic container after taken, if you are feeling dizziness, drowsiness or any weakness as a reaction on your body, Then consider Dextrose 2.5% and Sodium Chloride 0.11% in plastic container not safe to drive or operate heavy machine after consumption. Meaning that, do not drive or operate heavy duty machines after taking the capsule if the capsule has a strange reaction on your body like dizziness, drowsiness. As prescribed by a pharmacist, it is dangerous to take alcohol while taking medicines as it exposed patients to drowsiness and health risk. Please take note of such effect most especially when taking Primosa capsule. It's advisable to consult your doctor on time for a proper recommendation and medical consultations. Is Dextrose 2.5% and Sodium Chloride 0.11% in plastic container addictive or habit forming?Medicines are not designed with the mind of creating an addiction or abuse on the health of the users. Addictive Medicine is categorically called Controlled substances by the government. For instance, Schedule H or X in India and schedule II-V in the US are controlled substances. Please consult the medicine instruction manual on how to use and ensure it is not a controlled substance.In conclusion, self medication is a killer to your health. Consult your doctor for a proper prescription, recommendation, and guidiance. advertisement
Reviewsdrugs.com conducted a study on Dextrose 2.5% and Sodium Chloride 0.11% in plastic container, and the result of the survey is set out below. It is noteworthy that the product of the survey is based on the perception and impressions of the visitors of the website as well as the views of Dextrose 2.5% and Sodium Chloride 0.11% in plastic container consumers. We, as a result of this, advice that you do not base your therapeutic or medical decisions on this result, but rather consult your certified medical experts for their recommendations.Visitor reportsVisitor reported usefulNo survey data has been collected yetVisitor reported side effectsNo survey data has been collected yetVisitor reported price estimatesNo survey data has been collected yetVisitor reported frequency of useNo survey data has been collected yetVisitor reported dosesNo survey data has been collected yetVisitor reported time for resultsNo survey data has been collected yetVisitor reported administrationNo survey data has been collected yetVisitor reported ageNo survey data has been collected yetVisitor reviews
The information was verified by Dr. Rachana Salvi, MD Pharmacology © 2002 - 2024 "sdrugs.com". All Rights Reserved |