Antithrombin III Immuno

Antithrombin III Human:

• Indications and usage
• Dosage and administration
• Dosage forms and strengths
• Contraindications
• Warnings and precautions
• Adverse reactions
• Drug interactions
• Use in specific populations
• Description
• Clinical pharmacology
• Clinical studies
• References
• How supplied/storage and handling
• Patient counseling information
• Antithrombin III Immuno (Antithrombin III Human) reviews

1 INDICATIONS AND USAGE

Antithrombin III Immuno (Antithrombin III Human) is a human antithrombin (AT) indicated in patients with hereditary antithrombin deficiency for:

• Treatment and prevention of thromboembolism
• Prevention of peri-operative and peri-partum thromboembolism

Antithrombin III Immuno (Antithrombin III Human) is a human antithrombin (AT) indicated in patients with hereditary antithrombin deficiency for:

• Treatment and prevention of thromboembolism
• Prevention of peri-operative and peri-partum thromboembolism (1)

2 DOSAGE AND ADMINISTRATION

For intravenous use after reconstitution only

For intravenous use after reconstitution only

• Individualize dose to achieve AT level of 80% to 120% of normal human plasma

Adapt the rate of administration to the response of the patient; typically the full dose is given over 10 to 20 minutes. (2.3)

2.1 Dose

• Each vial of Antithrombin III Immuno (Antithrombin III Human) has the functional activity, in International Units (units), stated on the label of the vial. The potency assignment has been determined with a standard calibrated against a World Health Organization antithrombin reference preparation. When prepared as directed, the approximate final concentration is 50 units per milliliter.
• A guide for dosing Antithrombin III Immuno (Antithrombin III Human) is provided in Table 1.

• Monitor functional plasma levels of AT. and adjust subsequent dosing based on the trough level achieved with the preceding dose until predictable peak and trough levels have been achieved, generally between 80% to 120% of normal.(1)
• Maintain plasma AT levels between 80% to 120% by administering maintenance doses of 60% of the loading dose, administered every 24 hours. Adjust the maintenance dose and interval between doses based on actual plasma AT levels achieved.
• Individualize the exact loading and maintenance dose and/or dose intervals for each patient based on the individual clinical conditions, response to therapy, and actual plasma AT levels achieved. Recovery of Antithrombin III Immuno (Antithrombin III Human) may vary by patient. For example,
  • The half-life of AT has been reported to be shortened following surgery,(2) hemorrhage or acute thrombosis, and during intravenous heparin (or low molecular weight heparin) administration.(3-6) In such conditions, monitor plasma AT levels more frequently, and administer Antithrombin III Immuno (Antithrombin III Human) as necessary.
  • When an infusion of Antithrombin III Immuno (Antithrombin III Human) is indicated for a patient with hereditary deficiency to control an acute thrombotic episode or prevent thrombosis during or following surgical or obstetrical procedures, raise the AT level to normal and maintain this level for 2 to 8 days, depending on the indication for treatment, type and extent of surgery, patient’s medical condition, past history and physician’s judgment. Base the concomitant administration of heparin in each of these situations on the medical judgment of the physician.

2.2 Reconstitution

• Warm Antithrombin III Immuno and Sterile Water for Injection, USP (diluent) vials to room temperature before reconstitution.
• Remove shrink band from the Antithrombin III Immuno (Antithrombin III Human) vial. If the shrink band is absent or shows signs of tampering, do not use the product and notify Grifols Therapeutics Inc. immediately.
• Remove the plastic flip top from each vial (Fig. A). Cleanse each vial stopper with an alcohol swab and allow surface to dry.
• Carefully remove the plastic sheath from the short end of the transfer needle. Insert the exposed needle into the diluent vial to the hub (Fig. B).
• Carefully grip the sheath of the other end of the transfer needle and twist to remove it.
• Invert the diluent vial and insert the attached needle into the Antithrombin III Immuno (Antithrombin III Human) vial at a 45° angle (Fig. C). This will direct the stream of diluent against the wall of the vial and minimize foaming. The vacuum will draw the diluent into the Antithrombin III Immuno (Antithrombin III Human) vial.*
• When diluent transfer is complete, remove the diluent vial and transfer needle (Fig. D).
• Immediately after adding the diluent, swirl the Antithrombin III Immuno (Antithrombin III Human) vial continuously until the product is completely dissolved (Fig. E). Some foaming may occur, but attempt to avoid excessive foaming. Visually inspect the vial for particulate matter and discoloration prior to administration.
• Clean the top of the vial of reconstituted Antithrombin III Immuno (Antithrombin III Human) again with a new alcohol swab and let surface dry.
• Attach the filter needle (from the package) to the sterile syringe. Withdraw the Antithrombin III Immuno (Antithrombin III Human) solution into the syringe through the filter needle (Fig. F).
• Remove the filter needle from the syringe and replace with an appropriate injection or butterfly needle for administration.
• If the same patient is using more than one vial of Antithrombin III Immuno (Antithrombin III Human), draw the contents of multiple vials into the same syringe through the filter needles provided.

• If vacuum is lost in the Antithrombin III Immuno (Antithrombin III Human) vial during reconstitution, use a sterile syringe to remove the sterile water from the diluent vial and inject it into the Antithrombin III Immuno (Antithrombin III Human) vial, directing the stream of fluid against the wall of the vial.

2.3 Administration

• Visually inspect parenteral drug products for particulate matter and discoloration prior to administration, whenever solution and container permit.
• Administer Antithrombin III Immuno (Antithrombin III Human), once reconstituted, alone without mixing with other agents or diluents.
• Administer within 3 hours following reconstitution. Do not refrigerate after reconstitution.
• Adapt the rate of administration to the response of the individual patient, but administration of the entire dose in 10 to 20 minutes is generally well tolerated.

• Warnings and Precautions, Hypersensitivity Reactions (5.1) 12/2015

3 DOSAGE FORMS AND STRENGTHS

Antithrombin III Immuno (Antithrombin III Human) is a sterile lyophilized powder for reconstitution in single use vials. Each vial of Antithrombin III Immuno (Antithrombin III Human) contains the labeled amount of antithrombin in units per vial, typically 500 units. When reconstituted with 10 mL of Sterile Water for Injection, USP, the final concentration is approximately 50 units per mL.

The potency is determined with a standard calibrated in International Units against a World Health Organization (WHO) antithrombin reference preparation.

For injection: approximately 500 units, lyophilized powder in single-use vial for reconstitution. (3)

4 CONTRAINDICATIONS

None.

None. (4)

5 WARNINGS AND PRECAUTIONS

• Hypersensitivity reactions, including anaphylaxis, are possible. Should symptoms occur, discontinue Antithrombin III Immuno infusion and begin appropriate treatment. (5.1)
• Because Antithrombin III Immuno (Antithrombin III Human) is made from human blood, it may carry a risk of transmitting infectious agents, e.g., viruses, the variant Creutzfeldt-Jakob disease (vCJD) agent and, theoretically, the Creutzfeldt-Jakob (CJD) disease agent. (5.2)
• Perform coagulation tests to avoid excessive or insufficient anticoagulation and monitor for bleeding or thrombosis. Measure functional plasma AT levels with amidolytic or clotting assays; do not use immunoassays. (5.3)

5.1 Hypersensitivity Reactions

Hypersensitivity reactions, including anaphylaxis, are possible. Early signs of hypersensitivity reactions, which can progress to anaphylaxis, may include angioedema, chest tightness, hypotension, rash, nausea, vomiting, paresthesia, restlessness, wheezing and dyspnea. If hypersensitivity symptoms occur, discontinue use of the product immediately and administer appropriate emergency treatment.

5.2 Transmission of Infectious Agents

Because THROMBATE III is made from human blood, it may carry a risk of transmitting infectious agents, e.g., viruses, the variant Creutzfeldt-Jakob disease agent and, theoretically, the Creutzfeldt-Jakob disease (CJD) agent. There is also the possibility that unknown infectious agents may be present in the product. The risk that the product will transmit viruses has been reduced by screening plasma donors for prior exposure to certain viruses, by testing for the presence of certain current virus infections, and by inactivating and removing certain viruses during manufacture. Despite these measures, this product may still potentially transmit diseases.

Report all infections suspected by a physician possibly to have been transmitted by this product to Grifols Therapeutics Inc. at 1-800-520-2807.

5.3 Monitoring: Laboratory Tests

• The effect of drugs that use antithrombin to exert their anticoagulation may be altered when Antithrombin III Immuno (Antithrombin III Human) is added or withdrawn. Regularly perform coagulation tests suitable for the anticoagulant used (e.g., aPTT and anti-Factor Xa activity) to avoid excessive or insufficient anticoagulation. Additionally, monitor the patients for the occurrence of bleeding or thrombosis.
• Measure functional levels of AT in plasma by amidolytic assays using chromogenic substrates or by clotting assays. Do not use immunoassays because they do not detect all hereditary AT deficiencies.

6 ADVERSE REACTIONS

In clinical studies, the most common adverse reactions were dizziness, chest discomfort, nausea, dysgeusia, and pain (cramps).

The most common adverse reactions (≥ 5% of subjects) in clinical studies were dizziness, chest discomfort, nausea, dysgeusia, and pain (cramps). (6)

To report SUSPECTED ADVERSE REACTIONS, contact Grifols Therapeutics Inc. at 1-800-520-2807 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

6.1 Clinical Trials Experience

Because clinical studies are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of one drug cannot be directly compared to rates in other clinical trials of another drug and may not reflect the rates observed in clinical practice.

Two clinical trials were conducted in 33 subjects with congenital AT deficiency. The first was a prospective, open-label, dose-escalation, dose-ranging, and pharmacokinetic study in 11 asymptomatic subjects. Eight subjects received a single dose, escalated sequentially, followed by weekly dose ranging from 25 to 125 unit/kg. Five subjects (including 2 from the first part of the study) received weekly Antithrombin III Immuno (Antithrombin III Human) for periods of up to 23 weeks in doses ranging from 125 to 225 unit/kg. The second trial was a phase III, prospective, open-label study conducted in 24 subjects for additional kinetics (n=3), the prevention of thrombosis (n=13) during high risk conditions (pregnancy, surgery), or the treatment of thrombosis (n=10). Loading doses targeted an AT plasma level of 120% and ranged from 33 to 150 unit/kg. Maintenance doses targeted a plasma AT range of 70% to 120%, which were 23 to 75 unit/kg.

Adverse reactions reported during the 2 clinical trials are listed in Table 2. Nine subjects (27%) experienced 29 adverse reactions which occurred during 17 of 389 infusions. There were no serious adverse reactions reported. The severity of adverse reactions was reported as mild or moderate, except for wound secretion and hematoma, which was severe.

During clinical investigation of Antithrombin III Immuno (Antithrombin III Human), there were no reports of virus transmission. None of 12 subjects monitored for a median of 8 months (range 2–19 months) after receiving Antithrombin III Immuno (Antithrombin III Human) became antibody positive to human immunodeficiency virus (HIV-1). None of 14 subjects monitored for ≥ 3 months demonstrated any evidence of hepatitis.

7 DRUG INTERACTIONS

The anticoagulant effect of heparin is enhanced by concurrent treatment with Antithrombin III Immuno (Antithrombin III Human) in patients with hereditary AT deficiency. Thus, in order to avoid bleeding, the dosage of heparin (or low molecular weight heparin) may need to be reduced during treatment with Antithrombin III Immuno (Antithrombin III Human).

The effect of drugs that use antithrombin to exert their anticoagulation may be altered when Antithrombin III Immuno (Antithrombin III Human) is added or withdrawn. Regularly perform coagulation tests suitable for the anticoagulant used (e.g., aPTT and anti-Factor Xa activity) and at close intervals to avoid excessive or insufficient anticoagulation. Adjust dosage of anticoagulant as necessary. Additionally, monitor the patients for the occurrence of bleeding or thrombosis.

The anticoagulant effect of heparin is enhanced by concurrent treatment with Antithrombin III Immuno (Antithrombin III Human). To avoid bleeding, reduce the dosage of heparin. (7)

8 USE IN SPECIFIC POPULATIONS

Pregnancy: suspend heparin administration and continue Antithrombin III Immuno administration during labor and delivery. (8.1)

8.1 Pregnancy

Risk Summary

There are no data with Antithrombin III Immuno (Antithrombin III Human) use in pregnant women to inform a drug-associated risk. However, there are clinical considerations . It is not known whether Antithrombin III Immuno (Antithrombin III Human) can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Antithrombin III Immuno (Antithrombin III Human) should be given to a pregnant woman only if clearly needed. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2-4% and 15-20%, respectively.

Reproduction studies have been performed in rats and rabbits at doses up to four times the human dose and have revealed no evidence of impaired fertility or harm to the fetus due to Antithrombin III Immuno (Antithrombin III Human).

Clinical Considerations

Labor or Delivery

Suspend heparin (or low molecular weight heparin) administration and continue Antithrombin III Immuno (Antithrombin III Human) administration during labor and delivery.

8.2 Lactation

Risk Summary

There is no information regarding the presence of Antithrombin III Immuno in human milk, the effects on the breastfed infant, or the effects on milk production. The developmental and health benefits of breastfeeding should be considered along with the mother’s clinical need for Antithrombin III Immuno (Antithrombin III Human) and any potential adverse effects on the breastfed infant from Antithrombin III Immuno (Antithrombin III Human) or from the underlying maternal condition.

8.4 Pediatric Use

Safety and effectiveness in the pediatric population have not been established.

8.5 Geriatric Use

The safety and effectiveness in the geriatric population have not been established.

11 DESCRIPTION

Antithrombin III Immuno (Antithrombin III Human)_, Antithrombin III Immuno (Antithrombin III Human) (Human), is a sterile, non-pyrogenic concentrate of human antithrombin (AT) in lyophilized powder form for reconstitution for intravenous injection. When reconstituted with Sterile Water for Injection, USP, Antithrombin III Immuno (Antithrombin III Human) has a pH of 6.0 to 7.5 and contains 110 mEq/L to 210 mEq/L sodium, 110 mEq/L to 210 mEq/L chloride, 0.075 M to 0.125 M alanine, and not more than 0.1 unit of heparin per 1 unit of AT. Antithrombin III Immuno (Antithrombin III Human) contains no preservative.

Antithrombin III Immuno (Antithrombin III Human) is prepared from pooled units of human plasma from normal donors. The capacity of the Antithrombin III Immuno (Antithrombin III Human) manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model using a wide range of viruses with diverse physicochemical properties. There are two dedicated virus inactivation/removal steps included in the Antithrombin III Immuno (Antithrombin III Human) manufacturing process: a heat treatment step at 60°C ± 0.5°C for not less than 10 hours for virus inactivation and a nanofiltration step for effective removal of viruses as small as 18 nm.

The Antithrombin III Immuno (Antithrombin III Human) manufacturing process was also investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the variant Creutzfeldt-Jakob disease (vCJD) and Creutzfeldt-Jakob disease (CJD) agents. An individual production step in the Antithrombin III Immuno (Antithrombin III Human) manufacturing process has been shown to decrease TSE infectivity of that experimental model agent. The TSE reduction step is the Effluent I to Effluent II + III fractionation step (6.0 log₁₀). These studies provide reasonable assurance that low levels of vCJD/CJD agent infectivity, if present in the starting material, would be removed.

12 Clinical Pharmacology

12.1 Mechanism of Action

Antithrombin, an alpha₂-glycoprotein of molecular weight 58,000, is normally present in human plasma at a concentration of approximately 12.5 mg/dL and is the major plasma inhibitor of thrombin. Inactivation of thrombin by AT occurs by formation of a covalent bond resulting in an inactive 1:1 stoichiometric complex between the two, involving an interaction of the active serine of thrombin and an arginine reactive site on AT. AT is also capable of inactivating other components of the coagulation cascade including factors IXa, Xa, XIa, and XIIa, as well as plasmin. The neutralization rate of serine proteases by AT proceeds slowly in the absence of heparin, but is greatly accelerated in the presence of heparin. As the therapeutic antithrombotic effect of heparin is mediated by AT, heparin in vivo is ineffective in the absence or near absence of AT.

After administration, Antithrombin III Immuno temporarily replaces the missing AT in patients with hereditary antithrombin deficiency.

12.3 Pharmacokinetics

In a clinical trial of Antithrombin III Immuno (Antithrombin III Human) conducted in asymptomatic subjects with hereditary deficiency of AT, 8 subjects were administered a single dose of Antithrombin III Immuno (Antithrombin III Human) at doses ranging from 25 units/kg to 125 units/kg. Pharmacokinetic parameters were determined using immunologic and functional AT assays (Table 3).

14 CLINICAL STUDIES

In a prospective, open-label clinical trial, 21 subjects were administered Antithrombin III Immuno (Antithrombin III Human) for 16 prophylaxis events (n=13 subjects) and 10 for treatment of thrombosis (n=10 subjects) with 2 subjects receiving Antithrombin III Immuno (Antithrombin III Human) for both prophylaxis and treatment of thrombosis. None of the 13 subjects with hereditary AT deficiency and histories of thromboembolism treated prophylactically on 16 separate occasions with Antithrombin III Immuno (Antithrombin III Human) for high thrombotic risk situations (11 surgical procedures, 5 pregnancies and/or deliveries) developed a thrombotic complication. Heparin was administered in 3 of the 11 surgical procedures. Two of the pregnant subjects received LMW heparin prophylactically during the first trimester, but which was unable to maintain anti-coagulation with increasing dosages. They experienced a thrombosis, which subsequently resolved with the addition of Antithrombin III Immuno (Antithrombin III Human), and were therefore administered Antithrombin III Immuno (Antithrombin III Human) and LMW heparin prophylaxis weekly during the second and third trimesters, and during labor and delivery. These two subjects did not experience a new thrombosis.

Ten subjects with hereditary AT deficiency were treated with Antithrombin III Immuno (Antithrombin III Human) as well as heparin (n=9) for major thrombotic or thromboembolic complications, including 4 subjects with thrombosis during the first trimester of pregnancy. Nine subjects recovered with no additional thromboses or extension of existing thrombosis. The tenth subject died due to complications from the original pulmonary embolism with infarction which preceded treatment with Antithrombin III Immuno (Antithrombin III Human).

15 REFERENCES

• Schwartz RS, Bauer KA, Rosenberg RD, et al. Clinical experience with Antithrombin III Immuno (Antithrombin III Human) concentrate in treatment of congenital and acquired deficiency of antithrombin. Am J Med. 1989;87 (Suppl 3B):53S-60S.
• Mannucci PM, Boyer C, Wolf M, et al. Treatment of congenital Antithrombin III Immuno (Antithrombin III Human) deficiency with concentrates. Br J Haematol. 1982;50(3):531-5.
• Collen D, Schetz J, de Cock F, et al. Metabolism of Antithrombin III Immuno (Antithrombin III Human) (heparin cofactor) in man: effects of venous thrombosis and of heparin administration. Eur J Clin Invest. 1977;7(1):27-35.
• Marciniak E, Gockerman JP. Heparin-induced decrease in circulating antithrombin-III. Lancet. 1977;2(8038):581-4.
• O’Brien JR, Etherington MD. Effect of heparin and warfarin on Antithrombin III Immuno (Antithrombin III Human). Lancet. 1977;2(8050):1232.
• Kakkar VV, Bentley PG, Scully MF, et al. Antithrombin III Immuno (Antithrombin III Human) and heparin. Lancet. 1980;1(8159):103-4.

16 HOW SUPPLIED/STORAGE AND HANDLING

Antithrombin III Immuno (Antithrombin III Human) is supplied in a kit containing one single use vial of Antithrombin III Immuno (Antithrombin III Human) lyophilized powder for reconstitution, one vial of Sterile Water for Injection, USP, one sterile double-ended transfer needle, and one sterile filter needle. The total activity of AT in International Units is stated on the label of the Antithrombin III Immuno (Antithrombin III Human) vial.

Components used in the packaging of Antithrombin III Immuno (Antithrombin III Human) are made with natural rubber latex.

• Store Antithrombin III Immuno (Antithrombin III Human) at temperatures not to exceed 25°C (77°F).
• Avoid freezing as breakage of the diluent vial might occur.

17 PATIENT COUNSELING INFORMATION

Hypersensitivity Reactions

Inform patients that allergic-type hypersensitivity reactions are possible and instruct them to inform their physicians about any past or present known hypersensitivity to human plasma proteins prior to treatment with Antithrombin III Immuno (Antithrombin III Human). Inform patients of the early signs of hypersensitivity reactions including hives, generalized urticaria, tightness of the chest, wheezing, hypotension, and anaphylaxis and to notify their health care provider immediately if these events develop.

Transmission of Infectious Disease

Inform patients that Antithrombin III Immuno (Antithrombin III Human) is made from human plasma and may carry a risk of transmitting infectious agents that can cause disease (e.g., viruses, the variant Creutzfeldt-Jakob disease (vCJD) agent and, theoretically, the Creutzfeldt-Jakob disease (CJD) agent). Inform patients that this risk has been reduced by screening plasma donors for prior exposure to certain infectious agents, by testing the donated plasma for markers of certain current infections, and by inactivating and/or removing pathogens during manufacturing.

Manufactured by:

GRIFOLS

Grifols Therapeutics Inc.

Research Triangle Park, NC 27709 USA

U.S. License No. 1871

3045764

NDC 13533-605-21

Antithrombin III Immuno (Antithrombin III Human) (Human)

Antithrombin III Immuno (Antithrombin III Human)^®

Heat-Treated

Nanofiltered

Lyophilized Powder

For Intravenous Administration Only

Grifols Therapeutics Inc.

Research Triangle Park, NC 27709 USA

U.S. License No. 1871

The patient and physician should discuss the risks and benefits of this product.

No Preservative

Sterile - Nonpyrogenic

Reconstitute with 10 mL Sterile Water for Injection, USP.

Store at temperatures not to exceed 25°C (77°F). Do not freeze.

Dosage and Administration: Read package insert.

Rx only

3036923

Lot

Exp.

IU

NDC 13533-602-50

Antithrombin III Immuno (Antithrombin III Human) (Human)

Antithrombin III Immuno (Antithrombin III Human)^®

Heat-Treated

Nanofiltered

Lyophilized Powder

For Intravenous Administration Only

Grifols

CONTENTS:

One bottle of Antithrombin III Immuno (Antithrombin III Human)

10 mL Sterile Water for Injection, USP

One sterile filter needle

One sterile double-ended transfer needle

No Preservative

Sterile-Nonpyrogenic

THIS PRODUCT IS PREPARED FROM LARGE POOLS OF HUMAN PLASMA WHICH MAY CONTAIN INFECTIOUS AGENTS. SEE PACKAGE INSERT WARNINGS.

The patient and physician should discuss the risks and benefits of this product.

The product when reconstituted with 10 mL Sterile Water for Injection, USP, contains 110–210 mEq/L sodium, 110 –210 mEq/L chloride, 0.075–0.125 M alanine, and not more than 0.1 IU heparin/IU ATIII.

Administer within 3 hours after reconstitution.

Dosage and Administration: Read enclosed package insert.

Store at temperatures not to exceed 25°C (77°F). Do not freeze.

If the shrink band is absent or shows any sign of tampering, do not use the product and notify Grifols Therapeutics Inc. immediately.

Not Returnable for Credit or Exchange

Rx only

CAUTION: U.S. federal law prohibits dispensing without prescription.

Grifols Therapeutics Inc.

Research Triangle Park, NC 27709 USA

U.S. License No. 1871

Open other end

Carton: 3044020

NDC 13533-200-10

Sterile Water for Injection, USP

10 mL

Rx Only

For reconstitution of accompanying product

Single-Dose Container, Nonpyrogenic

Do not use unless clear.

No antimicrobial agent or other substance has been added.

Do not use for intravascular injection without making approximately isotonic by addition of suitable solute.

Discard unused portion.

Mfd by: Laboratorios Grifols, S. A., Parets del Vallès, Barcelona, 08150 Spain

Mfd for: Grifols Therapeutics Inc., Research Triangle Park, NC, 27709 USA

3041278

Lot / Exp.

Water:

• Active ingredient
• Purpose
• Uses
• Warnings
• Directions
• Other information
• Inactive ingredients
• Questions?
• Antithrombin III Immuno (Water) reviews

Active ingredient

Antithrombin III Immuno (Water) 99.8%

Purpose

Emergency eyewash

Uses

• for flushing or irrigating the eye to reduce chances of severe injury caused by acid, alkali, or particulate contamination.

Warnings

For external use only

Do not use

• if solution changes color or gets cloudy
• with contact lenses
• if twist-off top is broken or missing
• in open wounds in or near the eyes
  

When using this product

• avoid contamination, do not touch tip of container to any surface
  

When using this product

• avoid contamination, do not touch tip of container to any surface
  

Stop use and consult a doctor if you have

• changes in vision
• eye pain
• continued redness or irritation of the eye, or if the condition worsens or persists
  

Keep out of reach of children.

If swallowed, get medical help or contact a Poison Control Center right away.

Directions

• remove contacts before using
• twist top to remove
• flush the affected eye as needed, controlling the rate of flow of the solution by pressure on the bottle
  

• if necessary, continue flushing with emergency eyewash or shower
  

• do not reuse
• once opened, discard
  

• obtain medical treatment
  

Other information

• store at room temperature, 15^o to 30^o C (59^o to 86^o F)
• do not freeze
  

Inactive ingredients

Questions?

Sperian Eye and Face Protection, Inc.

(a Honeywell Company)

825 East Highway 151

Platteville, WI 53818 USA